單搖好讚呀 (前叉是阿魯)

這個也很厲害 The Frankenbike Build: My Honda CBR 600 F3 Build-Off - Team-BHP

HK-米国

??

其實最佳解法應該是找Yamaha YZF600R的整組車頭 (把手總磅, 上/下三角台, 前叉/土除, 輪框/碟盤/卡鉗/輪軸), 一來車子的定位/重量相仿, 前叉性能不錯長度接近不會影響幾何, 雙子星卡鉗很棒; 還有最重要的時速錶線機構! 只可惜整組很難找

目前還是想push車店把阿魯前叉搞上去, 時速/哩程可能得花錢買koso的磁鐵感應式

KOSO RX2 (or RX2N ?) Koso RX2N R Honda 94 CBR600 F2 Race Bike dash setup ...

forums.vwvortex.com/show...

94 fork set 94 Honda CBR 600 F2 Front End Frok Assembly 47E | e...

600RR swing arm on F3 www.customfighters.com/f...

CBR600F2 EVO Track Bike CBR600 Evo-II My personal Project finished 2010 | Race...

here is a difference in shock lengths from the f3's, I believe 95/96 F3's are 11inch / 46mm dia shock, the 97/98's are 11.5inch / 40mm dia.
F2 shocks are 11.5inch length.

It's hard to tell in that ebay auction, but a good way to check besides asking the guy to measure the shock, is the shorter showa with the 46mm piston has a much wider shock body, usually when comparing in pics with the remote res. beside it, the shock body should be substantially wider than the remote res.